行業知識

PA6 7335F|美國杜邦 PA6 7335F物性黃卡|PA6 7335F價格

發布時間：2020-09-14 18:58 幫助了1459人

DuPont Performance Polymers Zytel? 7335F NC010 Nylon 6 (Unverified Data**)

Polymer,Thermoplastic,Nylon,Nylon 6

DuPont Performance Polymers

產品說明:

Zytel? 7335F NC010 is a nucleated, lubricated polyamide 6 resin for injection molding.

Information provided by DuPont Performance Polymers

DuPont Performance Polymers Zytel? 7335F NC010 Nylon 6 (Unverified Data**) 物性表（PA6 7335F最新價格）

物理性能	額定值 (公制)	額定值 (英制)	測試方法
密度	1.13 g/cc	0.0408 lb/in3	DAM; ISO 1183
Water Absorption	3.0 % @Temperature 23.0 °C	3.0 % @Temperature 73.4 °F	Equilibrium 50%RH; DAM; ISO 62, Similar to
	9.0 % @Temperature 23.0 °C	9.0 % @Temperature 73.4 °F	Saturation, immersed; DAM; ISO 62, Similar to
線性成型收縮率	0.0075 cm/cm @Thickness 1.60 mm	0.0075 in/in @Thickness 0.0630 in	DAM
	0.010 cm/cm @Thickness 3.20 mm	0.010 in/in @Thickness 0.126 in	DAM
線性成型收縮率,Flow	0.0060 cm/cm @Thickness 2.00 mm	0.0060 in/in @Thickness 0.0787 in	DAM; ISO 294-4
線性成型收縮率，橫向	0.0080 cm/cm @Thickness 2.00 mm	0.0080 in/in @Thickness 0.0787 in	DAM; ISO 294-4

機械性能	額定值 (公制)	額定值 (英制)	測試方法
抗張強度(屈服)	55.0 MPa @Temperature 23.0 °C	7980 psi @Temperature 73.4 °F	50%RH; ISO 527
	90.0 MPa @Temperature 23.0 °C	13100 psi @Temperature 73.4 °F	DAM; ISO 527
伸長率 (斷裂)	9.0 % @Temperature 23.0 °C	9.0 % @Temperature 73.4 °F	DAM; nominal; ISO 527
	15 % @Temperature 23.0 °C	15 % @Temperature 73.4 °F	50mm/min; DAM; ISO 527
	>= 50 % @Temperature 23.0 °C	>= 50 % @Temperature 73.4 °F	50mm/min; 50%RH; ISO 527
	>= 50 % @Temperature 23.0 °C	>= 50 % @Temperature 73.4 °F	50%RH; nominal; ISO 527
Elongation at Yield	3.8 % @Temperature 23.0 °C	3.8 % @Temperature 73.4 °F	DAM; ISO 527
	24 % @Temperature 23.0 °C	24 % @Temperature 73.4 °F	50%RH; ISO 527
拉伸模量	1.40 GPa @Temperature 23.0 °C	203 ksi @Temperature 73.4 °F	50%RH; ISO 527
	3.60 GPa @Temperature 23.0 °C	522 ksi @Temperature 73.4 °F	DAM; ISO 527
簡支梁無缺口沖擊強度	6.00 J/cm2 @Temperature -30.0 °C	28.6 ft-lb/in2 @Temperature -22.0 °F	50%RH; ISO 179/1eU
	7.00 J/cm2 @Temperature 23.0 °C	33.3 ft-lb/in2 @Temperature 73.4 °F	DAM; ISO 179/1eU
	11.0 J/cm2 @Temperature -30.0 °C	52.3 ft-lb/in2 @Temperature -22.0 °F	DAM; ISO 179/1eU
	12.0 J/cm2 @Temperature 23.0 °C	57.1 ft-lb/in2 @Temperature 73.4 °F	50%RH; ISO 179/1eU
簡支梁缺口沖擊強度	0.250 J/cm2 @Temperature -30.0 °C	1.19 ft-lb/in2 @Temperature -22.0 °F	DAM; ISO 179/1eA
	0.300 J/cm2 @Temperature -30.0 °C	1.43 ft-lb/in2 @Temperature -22.0 °F	50%RH; ISO 179/1eA
	0.450 J/cm2 @Temperature 23.0 °C	2.14 ft-lb/in2 @Temperature 73.4 °F	DAM; ISO 179/1eA
	1.80 J/cm2 @Temperature 23.0 °C	8.57 ft-lb/in2 @Temperature 73.4 °F	50%RH; ISO 179/1eA

電氣性能	額定值 (公制)	額定值 (英制)	測試方法
體積電阻率	1.00e+11 ohm-cm @Temperature 23.0 °C	1.00e+11 ohm-cm @Temperature 73.4 °F	50%RH; ASTM D257
	1.00e+11 ohm-cm @Temperature 23.0 °C	1.00e+11 ohm-cm @Temperature 73.4 °F	50%RH; IEC 60093
	>= 1.00e+15 ohm-cm @Temperature 23.0 °C	>= 1.00e+15 ohm-cm @Temperature 73.4 °F	DAM; IEC 60093
	1.00e+17 ohm-cm @Temperature 23.0 °C	1.00e+17 ohm-cm @Temperature 73.4 °F	DAM; ASTM D257
	1.00e+17 ohm-cm @Temperature 23.0 °C	1.00e+17 ohm-cm @Temperature 73.4 °F	DAM; IEC 60093
Surface Resistance	1.00e+11 ohm @Temperature 23.0 °C	1.00e+11 ohm @Temperature 73.4 °F	50%RH; ASTM D257
	1.00e+11 ohm @Temperature 23.0 °C	1.00e+11 ohm @Temperature 73.4 °F	50%RH; IEC 60093
	1.00e+13 ohm @Temperature 23.0 °C	1.00e+13 ohm @Temperature 73.4 °F	DAM; ASTM D257
介電常數	3.3 @Frequency 1.00e+6 Hz, Temperature 23.0 °C	3.3 @Frequency 1.00e+6 Hz, Temperature 73.4 °F	DAM; ASTM D150
	3.6 @Frequency 100 Hz, Temperature 23.0 °C	3.6 @Frequency 100 Hz, Temperature 73.4 °F	DAM; ASTM D150
	3.6 @Frequency 1000 Hz, Temperature 23.0 °C	3.6 @Frequency 1000 Hz, Temperature 73.4 °F	DAM; ASTM D150
	4.2 @Frequency 100 Hz, Temperature 23.0 °C	4.2 @Frequency 100 Hz, Temperature 73.4 °F	DAM; IEC 60250
介電強度	13.5 kV/mm @Thickness 3.20 mm, Temperature 23.0 °C	343 kV/in @Thickness 0.126 in, Temperature 73.4 °F	50%RH; Short Time; ASTM D149
	16.3 kV/mm @Thickness 3.20 mm, Temperature 23.0 °C	414 kV/in @Thickness 0.126 in, Temperature 73.4 °F	DAM; Short Time; ASTM D149
耗散因數	0.010 @Frequency 1000 Hz, Temperature 23.0 °C	0.010 @Frequency 1000 Hz, Temperature 73.4 °F	DAM; ASTM D150
	0.010 @Frequency 100 Hz, Temperature 23.0 °C	0.010 @Frequency 100 Hz, Temperature 73.4 °F	DAM; ASTM D150
	0.020 @Frequency 1.00e+6 Hz, Temperature 23.0 °C	0.020 @Frequency 1.00e+6 Hz, Temperature 73.4 °F	DAM; ASTM D150
	0.030 @Frequency 100 Hz, Temperature 23.0 °C	0.030 @Frequency 100 Hz, Temperature 73.4 °F	DAM; IEC 60250
	0.11 @Frequency 1.00e+6 Hz, Temperature 23.0 °C	0.11 @Frequency 1.00e+6 Hz, Temperature 73.4 °F	50%RH; ASTM D150
	0.23 @Frequency 1000 Hz, Temperature 23.0 °C	0.23 @Frequency 1000 Hz, Temperature 73.4 °F	50%RH; ASTM D150
	0.37 @Frequency 100 Hz, Temperature 23.0 °C	0.37 @Frequency 100 Hz, Temperature 73.4 °F	50%RH; ASTM D150
相比耐漏電起痕指數(CTI)	600 V @Temperature 23.0 °C	600 V @Temperature 73.4 °F	DAM; IEC 60112

熱性能	額定值 (公制)	額定值 (英制)	測試方法
線形熱膨脹系數 - 流動	500 μm/m-°C @Temperature 23.0 - 55.0 °C	278 μin/in-°F @Temperature 73.4 - 131 °F	DAM; ASTM E 831
	500 μm/m-°C @Temperature 23.0 - 55.0 °C	278 μin/in-°F @Temperature 73.4 - 131 °F	DAM; ISO 11359-1/-2
線性熱膨脹系數,橫向流動	92.0 μm/m-°C @Temperature 23.0 - 55.0 °C	51.1 μin/in-°F @Temperature 73.4 - 131 °F	DAM; ASTM E 831
	92.0 μm/m-°C @Temperature 23.0 - 55.0 °C	51.1 μin/in-°F @Temperature 73.4 - 131 °F	DAM; ISO 11359-1/-2
熔融溫度	221 °C	430 °F	10°C/min; DAM; ISO 11357-1/-3
載荷下熱變形溫度(0.46 MPa)	175 °C	347 °F	DAM; ISO 75-1/-2
載荷下熱變形溫度(1.8 MPa)	65.0 °C	149 °F	DAM; ISO 75-1/-2
可燃性(UL94)	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	DAM; UL94
	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	DAM; IEC 60695-11-10

加工性能	額定值 (公制)	額定值 (英制)	測試方法
加工（熔體）溫度	260 - 280 °C	500 - 536 °F	DAM
	270 °C	518 °F	DAM; Optimum
模具溫度	70.0 °C	158 °F	DAM; optimum
	50.0 - 90.0 °C	122 - 194 °F	DAM
干燥溫度	80.0 °C	176 °F	DAM
干燥時間	2.00 - 4.00 hour	2.00 - 4.00 hour	DAM
水分含量	<= 0.20 %	<= 0.20 %	DAM

材料描述		測試方法
添加劑	Lubricant	DAM
外觀	Natural Color	DAM
Drying Recommended	Yes, if moisture content of resin exceeds recommended level	DAM
特性	Chemical Resistance, Good	DAM
	Fatigue Resistant	DAM
	Fuel Resistant	DAM
	General Purpose	DAM
	Grease Resistant	DAM
	Mold Release, Good	DAM
	Nucleated	DAM
	Oil Resistant	DAM
形式	Pellets	DAM
Generic	Nylon 6	DAM
Material Status	Current	DAM
部件標識代碼	>PA6<	ISO 11469; DAM
Polymer Family	Polyamide	DAM
Polymer Type	PA6	DAM
加工方法	Injection Molding	DAM
產品分類	Unreinforced Resins	DAM
樹脂識別	PA6	ISO 1043; DAM
符合RoHS指令	Contact Manufacturer	DAM
Ultrasonic Weldable	Yes	DAM
用途	Appliance Components	DAM
	Automotive Applications	DAM